Adam Equipment HIGHLAND SERIES Spécifications télécharger pdf (Page 10)

8 | P a g e © Adam Equipment Company 2011

4.0 BASIC

OPERATION

4.1 TURNING

THE

BALANCE

Plug in the unit using the AC adapter or use the internal rechargeable battery. It is

recommended that you charge the battery for at least 8 hours before first use.

1) To turn on press the [on/off] key once and release. The balance will show the

software revision and the capacity then self-test before showing zero on the

display and the stable sign.

2) The balance is ready to be used.

3) To turn the balance off after use press the [on/off] key again. There is an auto

power-off function that will automatically turn the unit off if not used for a

period of time, this can be set in the parameters section.

If an error is shown while turning on the balance check the internal calibration

weight has not been left in the calibrate position. Move the lever all the way to the

left. Turn off the balance and turn it back on again.

4.2 ZEROING

TARE

You can press the [Tare] key to set a new zero point and show the zero reading if

the weight reading is less than 4% of the total of the maximum capacity of the

balance. This may be necessary if the weight reading is not reading zero with

nothing on the pan. The zero indicator will show up in the upper left corner of the

LCD.

If you are using a container to weigh then you can place this on the platform and

press the [Tare] key. Providing the container weight is more than 4% of the

maximum capacity of the balance, the digits will show zero and NET will light up on

the display. You can then weigh your sample in the container. Taring weight

subtracts from the total balance capacity.

Note: When the container is removed a negative value will be shown

equivalent to the total value of the amount tared. The balance will

not tare a value for a container unless the stability light indicates that

the weight is stable thus ensuring a correct taring function.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Pas de commentaire

Adam Equipment HIGHLAND SERIES Spécifications Page 10