Adam Equipment e4 Manuel d'utilisateur

© Adam Equipment Company 2013 Adam Equipment WBW SERIES WBW..M EC and WBW..aM NTEP Type Approved (P.N. 303669031, Revision E4, May 2013

© Adam Equipment Company 2013 8 4.0 KEYPAD KEYS PRIMARY FUNCTION SECONDARY FUNCTION [O/I] Switches the scale on or off [Zero] Sets t

© Adam Equipment Company 2013 9 5.0 DISPLAY The LCD will display a decimal point in the WBW..a and WBW..aM models or a comma as shown in the

© Adam Equipment Company 2013 10 7.0 BATTERY OPERATION • The scales can be operated from the battery, if desired. The battery life is a

© Adam Equipment Company 2013 11 10.0 OPERATIONS 10.1 ZEROING • You can press the [Zero] key at any time to set the zero point from whic

© Adam Equipment Company 2013 12 NOTE: When the container is removed a negative value will be shown. If the scale was tared just before removin

© Adam Equipment Company 2013 13 2. The limits can be locked by the manager. A Limit Password must be used to change the limits or recall other limi

© Adam Equipment Company 2013 14 12.0 CALIBRATION 12.1 WBW..M and WBW..aM APPROVED SCALES, CALIBRATION The scales are sealed to prevent unauthori

© Adam Equipment Company 2013 15 WBW..aM SECURITY SEALS: The device is equipped with a Category 1 Audit Trail. In addition a lead &wire and/or

© Adam Equipment Company 2013 16 • Press the [Tare] key when the stable indicator is on. • The scale will calibrate to the mass and then return

© Adam Equipment Company 2013 17 13.0 PARAMETER SETTING This section allows the user to access the parameters for customising the scale

© Adam Equipment Company 2013

© Adam Equipment Company 2013 18 “donE”. If the old parameter is other than “0000”, enter the old one when “P _ _ _ _” is displayed and

© Adam Equipment Company 2013 19 14.0 ERROR CODES During the initial power-on testing or during operation, the scale may show an error message. T

© Adam Equipment Company 2013 20 15.0 REPLACEMENT PARTS AND ACCESSORIES If you need to order any spare parts and accessories, contact your supplier

© Adam Equipment Company 2013 21 17.0 WARRANTY INFORMATION Adam Equipment offers Limited Warranty (Parts and Labour) for the components failed

© Adam Equipment Company 2013 22 Adam Equipment ADAM EQUIPMENT, BOND AVENUE, DENBIGH EAST INDUSTRIAL ESTATE, MILTON KEYNES, MK1 1SW, U.K. Tel: (

© Adam Equipment Company 2013 23 APPENDIX

24 | P a g e © Adam Equipment Company 2013

© Adam Equipment Company 2013 Manufacturer’s Declaration of Conformity This product has been manufactured in accordance with the harmonised Euro

© Adam Equipment Company 2013 ADAM EQUIPMENT is an ISO 9001:2008 certified global company with more than 40 years experience in the produc

© Adam Equipment Company 2013 1 CONTENTS 1.0 INTRODUCTION ...

© Adam Equipment Company 2013 2

© Adam Equipment Company 2013 3 1.0 INTRODUCTION • The WBW range provides accurate, fast and versatile general purpose weighing scales w

© Adam Equipment Company 2013 4 2.0 SPECIFICATIONS EC Type Approved Models (Type Approval Number T7476/TC7477) WBW 3M WBW 6M WBW 15M Kilogra

© Adam Equipment Company 2013 5 Pounds:Ounces Maximum Capacity 5 lb: 0.00 oz 9 lb:0.00 oz 18 lb:0.0 oz 35 lb: 0.0 oz Readability 0.01 oz 0.02

© Adam Equipment Company 2013 6 3.0 INSTALLATION 3.1 UNPACKING Remove the scale from the packing carefully. Inside the box you will find every

© Adam Equipment Company 2013 7 3.3 SETTING UP • The WBW Series comes with a stainless steel pan. Place it on the top if already not installe